|
Typhoon
2 3D RTF Electric
by Parkzone!
Typhoon 2 3D RTF Electric by Parkzone!
ParkZone's
Charge-and-Fly™ Typhoon™ 2 3D is for experienced RC
pilots who want the thrills of unlimited action in an electric park
flyer without the hassles of building one. Equipped with oversized
control surfaces and a powerful ParkZone™ BL400-15T brushless
motor and digital metal gear servos, it can perform the most aggressive
3D maneuvers imaginable with laser precision and power to
spare.
Key Features
-

Ready-to-fly 3D performance right from the box
- Reusable ZX10 72MHz radio system including
digital, metal gear 3-wire servos for precise control and fast response
- 3-cell 1800mAh Li-Po battery included with
variable rate balancing charger
- BL400-15T gear-reduced, brushless motor with
E-flite® 30-amp Pro Brushless ESC
- Dual metal gear, digital aileron servos
- Optional Side Force Generators™
included for improved stability and response in knife-edge fight
- Large control surfaces for maximum 3D
performance
- Dual flight modes (High and Low Rate)
- PNP version also available (PKZ4375)
Overview
ParkZone’s
Charge-and-Fly™ Typhoon™ 2 3D is for experienced RC
pilots who want the
thrills of unlimited action in an electric park flyer without the
hassles of building one. Equipped with oversized control surfaces and a
powerful ParkZone™ BL400-15T brushless motor and digital
metal gear
servos, it can perform the most aggressive 3D maneuvers imaginable with
laser precision and power to spare. Hovers, harriers, torque-rolls,
waterfalls—the Typhoon 2 does them all. The removable side
force
generators can be attached with just eight screws. And because the
wings and fuselage are molded from ParkZone’s super-strong,
feather-light Z-foam™ material, it can handle the punishment
of these
high-energy 3D aerobatics without getting bent out of shape.

Getting the Typhoon 2 airborne is about as simple as it gets.
Everything you need is in this box. Just attach the wing, tail and
landing gear, charge up the included Li-Po battery pack and in as
little as 40 minutes, you’re flying. Once in the air you can
choose
between Low and High Rate with a flip of the transmitter switch.
If you are a 3D pilot who loves the convenience of a ready-to-fly, but
wants to use your own transmitter, receiver, batteries and charger, the
Typhoon 2 3D Plug-N-Play (PNP) is
the plane for you!
|
Typhoon 2 3D RTF Electric
|
| Wingspan: |
39.4
in (1000mm) |
| Overall
Length: |
36.6
in (935mm) |
| Flying
Weight: |
26
oz (740 g) |
| Motor
Size: |
BL400-15T
brushless, gear reduced |
| Radio: |
72mHz
5+ channel FM proportional ZX10 |
| Servos: |
Four
3-wire digital servos |
| Trim
Scheme Colors: |
White
fuselage and wing with purple, yellow and black decals |
| CG
(center of gravity): |
Approx.
3.5" (89mm) back from the leading edge of the wing. |
| Prop
Size: |
13.5
x 7 and 12 x 8.75 (both included) |
| Speed
Control : |
E-flite®
30A Pro Brushless ESC with Switch Mode BEC (EFLA1030) |
| Recommended
Battery: |
3-cell
1800mAh Li-Po battery ((PKZ1031)included) |
| Aileron: |
Proportional |
| Elevator: |
Proportional |
| Rudder: |
Proportional |
| Throttle: |
Proportional |
| Approx.
Flying Duration: |
12-15
minutes on 1800mAh Li-Po |
| Approx.
Assembly Time: |
15
minutes |
| Gear
Ratio: |
8:1 |
| Available
Frequencies: |
Channels
17 (72.130), 19 (72.170), 21 (72.210), 50 (72.790), 52 (72.830) and 54
(72.870) |
| X-Port: |
No |
| Charger: |
2-3
cell DC Li-Po charger |
| Landing
Gear: |
Steerable
tail wheel, Wire gear, Foam wheels |
Park Flying Fun
Share the Knowledge ↝ Enjoy the Thrill ↝ Fuel the Passion!
Return to the top
|
|
©
Site Content
Copyright 2008 ⇒ 2010
Park Flying Fun
All Rights Reserved!
|
|
|