E-Flite Blade CX3
MD 520N
| |
|
|
E-Flite Blade CX3 MD 520N
E-Flite has released a brand new
Helicopter: the Blade CX3 coaxial
helicopter has new features and is
sporting a very exciting new look. A
follow-up in the footsteps of the CX
and CX2 helis, this one is even easier
for first-time beginners to fly and has
lots of scale details with its new
Police MD 520N body.
For more on Co-Axial Helicopters
Check out the optional
transmitter-activated navigation light
package (sold separately).
The CX3 comes in two versions. A RTF
(ready to fly) kit and a BNF (bind and
fly kit). Both versions come standard
with:
- The MD 520N Coaxial RC helicopter
- set up and test flown
- A quality DC balancing
charger
- A 800 mAh 2 cell 7.4V Li-Po
battery
- An advanced 3 in 1 control unit
that controls the lift, mixing of
rotors for yaw control, and Heading
Hold Gyro functions.
- Lightweight Spektrum AR6100e
receiver with DSM2 technology
- Two feather light S60 Super
Sub-Micro servos (6 grams each)
Key Features
- Advanced 3-in-1 control unit
including main motor ESCs, mixer
and heading lock gyro
- The heading lock gyro in the CX3
offers incredible hold and control
to maximize your flight
experience.
- Interference-free, 5-channel
E-flite transmitter with built-in
Spektrum™ 2.4GHz DSM2™
technology
- Lightweight Spektrum AR6100e
receiver with DSM2 technology
- Two feather-light S60 Super
Sub-Micro servos—just 6.0
grams each
- DC LiPo balancing charger and
convenient AC adapter
- 2S 7.4V 800mAh LiPo battery pack
with charge protection
circuitry
- Co-axial, counter-rotating rotor
blades that make hovering easy for
first-time pilots
- 100% factory assembled and test
flown—no assembly or
difficult setup required
- Compatible with most Blade CX2
option parts
- Optional LED navigational light
set sold separately (EFLH2009 or
EFLH2009R).
Overview
The flight
experts have done it again. The
Blade® CX3 MD 520N® RTF gives pilots
unbelievable micro-heli excitement.
The CX3 includes a radio system
equipped with Spektrum™ 2.4GHz
DSM2™ technology in the LP5DSM
transmitter and Spektrum AR6100e
receiver, providing 5-channel control
with interference-free flying.
It’s covered in the licensed MD
520N scale body with an attractive
police trim scheme.
Just like its predecessor, the Blade
CX3 offers first-time heli pilots
exceptional stability and incredible
control through the coaxial,
counter-rotating head design and
3-in-1 control unit. In addition,
this CX3 also features two
feather-light S60 Super Sub-Micro
servos that provide full cyclic
movement of forward, backward and
side-to-side maneuverability. The
Blade CX3 also includes a heading
lock gyro to provide better control
and locked-in performance. As with
other co-axial Blade helicopters, no
flying experience is required to
begin your heli flight with the Blade
CX3. This indoor helicopter is 100%
factory-assembled, test flown and
ready to fly out of the box, no
assembly or setup required—and
nothing left to buy. The Blade CX3 is
the first coaxial heli to incorporate
a heading lock gyro, a Spektrum DSM2
2.4GHz radio system and a scale body
all in one convenient ready-to-fly
package.
MD
520N® is a registered trademark or
trademarks of MD Helicopters Inc. and
is used under license to Horizon Hobby,
Inc.
Product Specifications
| Main Rotor
Diameter: |
13.6 in (345mm) |
| Gross
Weight: |
8.0 oz (227 g) w/battery |
| Length: |
16.4 in (415mm) |
| Motor
Size: |
180 Brushed (2 installed) |
| Kit/ARF/RTF: |
RTF |
| Control
System: |
E-flite LP5DSM
transmitter |
Needed to
Complete
Nothing other than time to
fly!
|
Kit
Includes
- 7.4V 800mAh 2-Cell LiPo,
JST/Balance
- 2-3 Cell LiPo Balancing
Charger, 0.65A
- AC to 12VDC, 1.5 Amp
Power Supply
- LP5DSM 5-Channel
Transmitter, 2.4GHz:
BCX2/3
|
|
|
|
|
